GENIE TELEHANDLER — GTH1056
With outstanding design and performance, Genie® GTH™ telehandlers provide all-around utility to answer virtually all your work site needs. Available in six power-packed models, Genie telehandlers offer exactly what you need for productivity in limited-access areas or applications where high reach is needed. With a wide range of available attachments, Genie telehandlers can easily handle even the most demanding jobs.
The new Genie® GTH™-1056 telehandler. Extensively field tested to validate performance, the GTH-1056 has been purposefully designed to lower total cost of ownership by 10% while delivering 20% more lift capacity at max height in a machine with a 30% stronger design. The GTH-1056 builds on popular features found on the proven GTH-636 and GTH-846 models, including a side-mounted engine and stronger boom design, to deliver a rugged, reliable telescopic handler with a 10,000 lb (4,536 kg) capacity.
FEATURES
• 74 HP, DEF-free engine option offering a low-maintenance solution
• New long-life Enduro A/T tires, a hybrid, all-terrain tread design exclusive to Genie
• Able to lift 5,000 lbs. (2,268 kg) at maximum height of 56 ft. 7 in. (17.25 m), and 3,000 lbs.
OPTIONS
CAB CONFIGURATION
• Closed cab: Heater, defrost, wipers, washer, split door
• Front and top glass
• Lift Guard White Noise Alarm
• Rear Proximity Alarm
• Rear proximity alarm with back-up camera and display
• Fire extinguisher
CHASSIS OPTIONS
• 121 hp, Deutz TCD 3.6, T4f, Side-mounted engine
• Powershift transmission (PS) 4-speed 121 hp
• Lift Connect Telematics
• Lift Connect with Access Manager upgrade
• Electric block heater
• Extreme cold weather package
• Fenders set of four
• Lojack stolen vehicle recovery system
• Positive air shutdown system
• Flashing beacon
• Work lights: High output LED cab, boom, rear
• Road and work lights: High output LED front, cab, boom, rear
• Air filled Enduro A/T tires
• Solid rough terrain tires
• Lockable battery disconnect
CARRIAGE/ATTACHMENT OPTIONS
• Quick-Attach™ Carriage, 48in / 1.2m
• QA Carriage, 60in / 1.6m
• QA Carriage, 72in / 1.8m
• QA Side tilt (rotating) carriage, 48in / 1.2m
• QA Side tilt (rotating) carriage, 60in / 1.5m
• QA swing carriage, 72in / 1.8m (45 deg L/R)
• Pallet forks, 48in (2 × 4 × 48in) / (.05x.1 × 1.2m) – set of 2
• Pallet forks, 60in (2 × 4 × 60in) / (.05x.1 × 1.5m) – set of 2
• Pallet forks, 72in (2 × 4 × 72in) / (.05x.1 × 1.8m) – set of 2
• Cubing tines, 48in (2 × 2 × 48in) / (.05x.05 × 1.2m) – set of 6
• Lumber forks, 60in (1.75 × 7 × 60in) / (.04x.18 × 1.5m) – set of 2
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Specifications
- Power - Battery: 1000 CCA 0°F (-18°C)
- ropstype: Enclosed
- Productivity - Auxiliary hydraulic pressure: 3,170 psi (220 bar)
- Productivity - Drive speed: 15 mph (24 km/h) | 18 mph (29 km/h)
- Power - Electrical system voltage: 12V
- Productivity - Boom extend/retract: 23/30 sec
- Technical Data - Fork cross section: 2.25 x 4 in (57 x 101 mm)
- Technical Data - Maximum forward reach: 42 ft (12.80 m)
- Technical Data - Ground clearance, center: 1 ft 3 in (0.38 m)
- Power - Fuel tank capacity: 30 gal (113.6 L)
- Productivity - Boom up/down: 15/12 sec
- Productivity - Turning radius, outside (4WS): 14 ft (4.27 m)
- Technical Data - Length, stowed (without forks): 22 ft 6 in (6.86 m)
- Power - Power source: Diesel
- Power - Alternator: Deutz TCD 3.6 - 95 amp
- Power - Hydraulic system capacity (w/tank): 52 gal (189.2 L)
- Technical Data - Height, stowed: 8 ft 6 in (2.59 m)
- Technical Data - Wheelbase: 11 ft 6 in (3.50 m)
- Productivity - Tires, standard size: Genie Enduro A/T 400/75-28
- Technical Data - Weight: 31,900 lb (14,470 kg)
- Power - Hydraulic tank capacity: 27 gal (102.2 L)
- Productivity - Lift capacity at maximum height: 5,000 lbs (2,268 kg)
- Technical Data - Maximum lift height: 56 ft 7 in (17.25 m)
- Productivity - Auxiliary hydraulic flow: 2-15 gpm (7.6-56.8 lpm)
- Productivity - Maximum lift capacity: 10,000 lbs (4,536 kg)
- Technical Data - Ground clearance, axle: 1 ft 6 in (0.46 m)
- Productivity - Draw bar pull : 23,000 lb (10,433 kg) | 25,000 lb (11,340 kg)
- Productivity - Frame leveling (side to side): 10°
- Productivity - Lift capacity at maximum reach: 3,000 lbs (1,361 kg)
- Technical Data - Width: 8 ft 6 in (2.59 m)
Alta Financial Services
Get in touch with our Financial Services department today.
View Financing OptionsBeyond Sales: Complete Solutions for Equipment, Parts, Service, and Training
Alta Material Handling offers industry-leading professional support to meet all your mobile equipment needs. We offer any kind of support you need for your material handling equipment. You can rely on us for repairs, parts, lift truck certification and training, fleet management, and an extensive best-in-class network to ensure your mobile equipment needs are met.
Parts
Whether you need a genuine manufacturer part or an aftermarket alternative, we have the parts and attachments you need to keep your machine running like new.
Service
Alta Material Handling offers industry-leading professional support to meet all your mobile equipment needs. You can rely on us for repairs, parts, lift truck certification, training, fleet management, and an extensive best-in-class network to ensure your mobile equipment needs are met.
Training
We offer convenient and effective safety training for all types of material handling equipment, like forklifts, aerial lifts, and anything else. We customize our training programs to fit your fleet and location.
Fleet Survey and Analysis
Allow us to provide a Comprehensive Fleet Survey and Analysis, and we will give you a Manual Pallet Jack for Free!
Contact Us