Bendi B3/30AC

BENDI FORKLIFT — B3/30AC

FRONT WHEEL DRIVE ARTICULATING VNA WAREHOUSE FORKLIFT

The Bendi model B3/30AC works in aisles as narrow as *72″ (1.8M), has a basic capacity of 3,000 lbs. (1361kg) at 24″ (600mm) load center and has lift heights available to 30′ (9.14M).

The Bendi B3/30AC is a 3-wheel articulating forklift with a single poly front drive tire and solid rubber rear tires. Front articulation of 220°, narrow mast and a compact front end allow easy stacking in Very Narrow Aisles. The B3/30AC can work inside and outside on paved surfaces. The B3/30AC does all the jobs of a reach truck in aisles at least 40″ (1M) smaller.

EXCEPTIONAL PERFORMANCE AND MANEUVERABILITY

Equipped with the LandActive control and the Landoll DuraSteerTM front wheel hydraulic steering, the B3/30AC provides exceptional control and makes load placement and retrieval superior to the competition.

MAXIMIZES MATERIAL HANDLING PRODUCTIVITY

The versatile Bendi B3/30AC forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out, while operating in very narrow aisles in your warehouse, replacing reach trucks that require much wider aisles. All tires on the Bendi B3/30AC are 18″ (457mm) diameter and the truck has great under clearance for avoiding floor obstructions.

*Based on 48” (1200mm) long x 40” (1000mm) wide load.

STANDARD FEATURES

• Three-Wheel Design, Single Front Wheel Drive

• 9.75\ (248mm) Stroke Integral Side Shifter

• 220˚ Front End Rotation

• Adjustable Seat and Steering Wheel

• DuraSteerTM Front Wheel Hydraulic Steering

• AC Traction Motor Controller with LandActive Control (LandActive control provides additional control during stacking as the maximum truck speed is controlled by steering angle.)

• AC Hydraulic Motor Controller

• Interactive LCD Status Monitor

• BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration

• Hydraulic Rear Wheel Brakes

• Safety Seat Switch and Seat Belts

• 40\ (1000mm) Tapered Tip Forks – Rear Tow Pin

• Hand Actuated Parking Brake

• Creep Speed Mode Selection Switch

• High Visibility Mast and 36\ (914mm) High Backrest

• Mast Tilt 1º Forward and 2º Backward

• 48 Volt Electrical System

• Three Section Hydraulic Control Valve

• Smooth Poly Front Drive Tire and Rubber Rear Tires

• Horn, Key Switch and Hour Meter

• Meets ANSI B56.1

OPTIONAL FEATURES

• Non-Standard Fork Lengths

• Dual Overhead Guard-Mounted LED Headlights

• Dual Rear Safety LED Light Bars

• Safety Flashing LED Light

• Backup Alarm – Beeping Tone (“Smart” dB Adjusting)

• Fire Extinguisher – OHG Post Mounted

• Roller / Slide-Out Battery Tray

• Lazer Fork Height Indicator

• Fork Positioner

• Keyless Key Pad On-Off

• Cold Storage Conditioned to -22°F (-30°C)

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.