From pre-owned forklifts to used aerial lifts, telehandlers, material handling vehicles, and more, you’ll find it at Alta Material Handling. Browse our inventory and request a quote or call to inquire.
View InventorySLT30AC/SLT35AC
Drexel: Forklifts
Specifications
Capacity (SLT30AC/SLT35AC): | 3000/3500 lbs |
Load Center : | 24 in |
Power Source : | 48 Volt Battery |
Travel Speed : | 6 mph |
Weight with Battery : | 13,550 lbs |
Drexel SwingMast® Rear Wheel Drive/Steer VNA Warehouse Forklift
The Drexel model SLT30AC and SLT35AC work in aisles as narrow as 56″ (1.4M), have a basic capacity of 3,000 lbs. (1361kg) or 3,500 lbs. (1588kg) at 24″ (600mm) load center and lift heights available to 26′ (7.92M).
The SLT30AC and SLT35AC are 3-wheel front/side loading VNA forklifts with a single smooth rubber rear-drive/steer tire and solid poly-front load tires. The front mast rotates 90° and has side shift of 20” (508mm), allowing stacking easily in Very Narrow Aisles. Both models can work inside and outside on paved surfaces, can perform the jobs of a normal front-loading forklift (including loading and unloading highway trucks and containers, working in bulk storage, drive-in rack, push back rack, double deep and climbing steep ramps). The SLT range does the jobs of reach and counterbalanced trucks in aisles over 50% smaller. The rear steering and drive allow turning in short-cross aisles further increasing the storage density when compared to counterbalanced trucks.
Exceptional Performance and Maneuverability
The SLT30AC and SLT35AC have fast lift/lower and travel speeds with a tight turning radius providing excellent maneuverability and productivity. The rollout battery compartment allows fast battery changes for multi-shift operations. High Visibility three and four stage masts are available for a wide range of applications including those with low overhead obstructions still requiring high lift heights. Wire Guidance is a standard option on this model allowing safe full-speed travel in the narrowest aisles.
- 3,000 lb. (1361kg) and 3,500 lb. (1588kg) Capacity at 24″ (600mm) Load Center
- Electronic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
- Three-Wheel Design, Single Rear-Wheel Drive and Steering Provide Excellent Maneuverability and Traction
- Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
- Single Joystick Controls Hydraulic Functions, Directional Control, Horn and Wire Guidance
- The Adjustable Swivel Seat Improves Operator Comfort while Traveling in Reverse
- High Visibility Mast Allows Optimum Safety and View of Loads and Forks
- An Electro/Mechanical Parking Brake is Automatically Applied When Power is Turned Off or the Operator Leaves the Seat
More information available